65
Checking and Cleaning the Print Head
If your print quality is not as good as it used to be—if
photos are too light, are missing colors, or have lines
running through them—PictureMate’s print head
nozzles may need cleaning.
You can check the nozzles and clean the print head if
necessary.
1
Load paper in PictureMate.
2
Press the
Menu
button on the remote control.
3
Select
Maintenance
and press
OK
.
4
Select
Nozzle Check
and press
OK
.
5
Press
. The nozzle check pattern is printed.
6
Check the pattern to see if there are any gaps or
missing lines.
●
If the pattern is OK, press
OK
to finish.
●
If the pattern has gaps or missing lines, select
No
and press
OK
. Continue pressing
OK
to
start Auto Cleaning.
Cleaning takes about 60 seconds. PictureMate
makes some noise and you see an
Auto
Cleaning
message.
If you don’t see any improvement after cleaning three
times, see “Print Quality Problems” on page 73.
OK
Needs
cleaning
Summary of Contents for C11CA54203 - PictureMate Show Digital Frame
Page 1: ...User s Guide ...
Page 3: ...3 Specifications 82 Notices 87 Index 65 ...
Page 106: ...106 ...