Settings item
Settings value
Explanation
Custom Paper Setting
(Touching any of registry number 01 to 10 will display settings items.)
Change Name
Register and change the name of the custom paper settings. The name
registered here is displayed in the
Paper Type
list.
Touch this to display the keypad screen. Up to 20 characters may be input
for the name. The keypad screen can be switched as shown below with the
button marked.
Touch the icons at bottom left to switch between input methods.
ABC: Enters alphabet letters.
123#: Enters numbers and symbols.
To change the key layout of the full keyboard, use
Keyboard
in the Basic
Settings menu.
U
“General Settings - Basic Settings” on page 143
Change Reference
Paper
Plain paper
*
You can select the media type that is the closest to the paper you are using.
Matte Paper
Photo Paper
CAD
Others
Advanced Media Setting
Platen Gap
1.2
This is the Platen Gap (distance between print head and paper) for the paper
selected in
Change Reference Paper
, so it does not normally need to be
changed. Change this to a setting that will widen the gap (a higher value) if
print results are smeared.
1.6
2.1
Top/Bottom Mar‐
gins
Standard
*
Setting this to Standard will set the top/bottom margins as follows
depending on the printer driver print targets.
❏
CAD/Line Drawing: 3 mm/3 mm
❏
Other: 30 mm/30 mm
Left and right margins will remain at 3 mm regardless of settings. If there is
any soiling on the top section of the print results, increase the top margin.
U
Top 3 mm/Bottom 3
mm
Top 15 mm/Bottom
15 mm
Top 35 mm/Bottom
15 mm
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
148
