❏
Cut sheet: 1 sheet of A4 or larger
A
Touch the following in order from the Home
screen.
❏
Roll paper
Roll paper information area -
Media Adjust
❏
Cut sheet
Paper Setting
-
Cut Sheet(1 sheet)
-
Media
Adjust
B
Touch
Print Head Alignment
-
Manual
-
Start
.
The adjustment patterns are printed.
C
Enter the numeric value of the pattern with the
most visible straight line among the printed
adjustment patterns of #1 and then touch
Adjustment #2
.
In the following example, pattern 0 has the least
streaks so you would enter 0.
If there is no difference between two adjacent
patterns and you are unsure which is the best one
to choose, enter the numeric value that comes
between them. For example, if you are unsure
whether to enter pattern 0 or 2, enter 1.
D
Select the adjustment patterns of #2 and #3 in the
same way as for #1.
E
Enter the numeric value of the pattern with the
least streaks among the adjustment patterns of #4
and then touch
OK
.
In the following example, pattern 0 has the least
streaks so you would enter 0.
If there is no difference between two adjacent
patterns and you are unsure which is the best one
to choose, enter the numeric value that comes
between them. For example, if you are unsure
whether to enter pattern 0 or 2, enter 1.
When
Print head alignment complete...
appears, the
procedure is finished.
The adjustment results are saved as settings of the
currently selected paper type.
When you want to unclog the print
head
We recommend checking for clogging by performing a
print head nozzle check if the printer has not been used
for an extended period or before important print jobs.
If the nozzle check results indicate clogging, carry out
print head cleaning.
Ink is consumed during print head cleaning.
Check the remaining amounts of ink cartridges and the
amount of empty space in the Maintenance Box and
provide new ink cartridges and Maintenance Box in
advance if they are low.
A
From the Home screen, touch
Settings
-
Maintenance
-
Print Head Nozzle Check
.
B
Touch
Start
to start printing a check pattern.
When changing the paper source displayed on
the start screen, touch
Paper Source
.
C
Check the printed check pattern for clogging.
Example of clean nozzles
If none of the pattern is missing, then the print
head nozzles are not clogged. Touch
to end
the nozzle clogging check.
Example of clogged nozzles
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Problem Solver
199
