❏
Cut sheet
Paper Setting
-
Cut Sheet(1 sheet)
-
Media
Adjust
B
Touch
Easy Adjustment
-
Start
.
Printing of the adjustment patterns starts.
When
Print head alignment complete...
appears, the procedure is finished.
The adjustment results are saved as settings of the
currently selected paper type.
Note:
A print head nozzle clogging check is performed
automatically before adjustment pattern printing.
If nozzles are determined to be clogged, cleaning
starts and the adjustment patterns will be printed
after cleaning finishes.
Refer to the following when the error message
Auto
Adjustment is unable to start because there is a
problem with the paper or printing status...
appears,
or when the adjustment results are not satisfactory.
U
“The prints are not what you expected” on
Paper Feed Adjust (Auto)
The following shows the length and number of sheets of
paper used for adjustment pattern printing.
❏
Roll paper: Approx. 230 mm
❏
Cut sheet: 1 sheet for A4 or larger
A
Touch the following in order from the Home
screen.
❏
Roll paper
Roll paper information area -
Media Adjust
❏
Cut sheet
Paper Setting
-
Cut Sheet(1 sheet)
-
Media
Adjust
B
Touch
Paper Feed Adjust
-
Auto
-
Start
.
Printing of the adjustment patterns starts.
When
Print head alignment complete...
appears, the procedure is finished.
The adjustment results are saved as settings of the
currently selected paper type.
Note:
A print head nozzle clogging check is performed
automatically before adjustment pattern printing.
If nozzles are determined to be clogged, cleaning
starts and the adjustment patterns will be printed
after cleaning finishes.
Refer to the following when the error message
Auto
Adjustment is unable to start because there is a
problem with the paper or printing status...
appears,
or when the adjustment results are not satisfactory.
U
“The prints are not what you expected” on
Print Head Alignment (Auto)
The following shows the length and number of sheets of
paper used for adjustment pattern printing.
❏
Roll paper: Approx. 227 mm
❏
Cut sheet: 1 sheet for A4 or larger
A
Touch the following in order from the Home
screen.
❏
Roll paper
Roll paper information area -
Media Adjust
❏
Cut sheet
Paper Setting
-
Cut Sheet(1 sheet)
-
Media
Adjust
B
Touch
Print Head Alignment
-
Auto
-
Start
.
Printing of the adjustment patterns starts.
When
Print head alignment complete...
appears, the procedure is finished.
The adjustment results are saved as settings of the
currently selected paper type.
Note:
A print head nozzle clogging check is performed
automatically before adjustment pattern printing.
If nozzles are determined to be clogged, cleaning
starts and the adjustment patterns will be printed
after cleaning finishes.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
49