Related Information
&
“Sending Faxes Dialing from the External Phone Device” on page 123
&
“Receiving Faxes After Confirming the Sender's Status” on page 133
&
Receiving Faxes After Confirming the Sender's Status
You can receive a fax while listening to sounds or voices through the printer's speaker while dialing,
communicating, and transmitting. You can use this feature when you want to receive a fax from a fax information
service by following an audio guide.
1.
Select
Fax
on the home screen.
2.
Tap
, and then specify the sender.
Note:
You can adjust the sound volume of the speaker.
3.
Wait until the sender answers your call. When you hear a fax tone, select
Send/Receive
at the upper right
corner of the LCD screen, and then select
Receive
.
Note:
When receiving a fax from a fax information service, and you hear the audio guidance, follow the guidance to make the
printer operations.
4.
Tap
x
.
Receiving Faxes from a Board with a Subaddress (SEP) and Password (PWD)
(Polling Receive)
By dialing to a sender, you can receive faxes from a board stored on sender's fax machine with a subaddress (SEP)
and password (PWD) feature. To use this feature, register the contact with the subaddress (SEP) and password
(PWD) in the contacts list in advance.
1.
Select
Fax
on the home screen.
2.
Select
(More).
3.
Select
Extended Fax
.
4.
Tap
Polling Receive
to set this to
On
.
5.
Tap
Close
, and then tap
Close
again.
6.
Select
Contacts
, and then select the contact with the registered subaddress (SEP) and password (PWD) to
match the destination board.
7.
Tap
x
.
User's Guide
Faxing
133
