![background image](http://html.mh-extra.com/html/epson/c11ch68401/c11ch68401_user-manual_108825217.webp)
The printhead is rubbing the surface of the paper.
Solutions
When copying on thick paper, the print head is close to the printing surface and the paper may be
scuffed. In this case, enable the reduce scuff setting.
Select
Settings
>
General Settings
>
Printer Settings
, and then enable
Thick Paper
on the control panel.
If you enable this setting, copy quality may decline or may slow down.
Copied Photos are Sticky
The copy was made on the wrong side of the photo paper.
Solutions
Make sure you are copying on the printable side. If you have accidentally copied on the wrong side of the
photo paper, you need to clean the paper path.
&
&
“Cleaning the Paper Path for Ink Smears” on page 126
The Position, Size, or Margins of the Copies are Incorrect
The following causes can be considered.
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
&
The size of the paper is set incorrectly.
Solutions
Select the appropriate paper size setting.
>
Printing, Copying, Scanning, and Faxing Quality is Poor
>
217
Summary of Contents for C11CH68401
Page 17: ...Part Names and Functions Front 18 Inside 20 Rear 21 ...
Page 29: ...Loading Paper Paper Handling Precautions 30 Paper Size and Type Settings 30 Loading Paper 31 ...
Page 34: ...Placing Originals Placing Originals 35 Originals that are not Supported by the ADF 36 ...
Page 369: ...Where to Get Help Technical Support Web Site 370 Contacting Epson Support 370 ...