7
Setting Up Your
Print Server
This chapter describes how to unpack and set up your print server.
You can locate the printer and print server anywhere in your home or office.
However, keep in mind that walls and ceilings will weaken the signal
between your print server, computer(s), and access point, and that the print
server must be within 120 feet of your other equipment.
Make sure you choose a location away from high temperatures, direct
sunlight, humidity, and dust. Do not place the print server on a metal
surface or near other devices that might cause interference, such as cordless
phones operating at 2.4 GHz, microwave ovens, or Bluetooth
™
devices.
Before you set up the print server, make sure your printer is set up and has
ink and paper. Follow the instructions on the
Start Here
sheet included with
the printer to set it up.
Then follow the instructions in these sections:
■
Unpacking the print server
■
Running a printer check
■
Connecting the print server
ZLUHOHVVVHUYHUERRN3DJH)ULGD\0D\30