Version 2.61 Feb. 2008
11
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T90)
3.1.3 Width and Height Properties
The width and height properties are explained in the following.
Settings
Property
Default
Value
Maximum
value [dot]
Minimum
value [dot]
RecLineSpacing 30
127
24
*1
JrnLineSpacing X
X
X
SlpLineSpacing X
X
X
SlpLineHeight [dot]
X
RecLineHeight [dot]
24,17
JrnLineHeight [dot]
X
SlpLineWidth [dot]
X
RecLineWidth [dot]
(When 79.5 mm is set)
512
RecLineWidth [dot]
(When 59.5 mm is set)
384
RecLineWidth [dot]
(When 57.5 mm is set)
360
JrnLineWidth [dot]
X
RecSidewaysMaxLines 17
*3
RecSidewaysMaxChars
(When Font A is selected)
138
*4
RecSidewaysMaxChars
(When Font B is selected)
184
*4
RecLinesToPaperCut 5
*2
SlpSidewaysMaxLines X
SlpSidewaysMaxChars X
SlpMaxLines X
X: No settings
*1
In the case of a line thermal station, the Line Spacing setting is identical with the height
of the characters which means that it can be set at up to 17 when Font B is selected.
*2
It can be changed by the settings of the RecLineSpacing or the character height.
*3
It can be changed by the settings of the RecLineSpacing or the RecLineHeight.
The value differs accordance with the selected paper width.
*4
It can be changed by the settings of the font width, or the selected paper type.