background image

13-4      

Printer Status Page Utility

R4C3610  Adm/G
Rev. C

A5 size

CHAP13.FM

8/4/00

Pass 0

L

Proof Sign-off:
KOW M.Arai  K.Nishi
K. Nishi
J.Hoadley

Note:

Use Standard TCP/IP Port Monitor for the port.

Install printer drivers using the Add Printer wizard. Do not 
install using Setup.exe because the Printer Status Page is not 
installed in this way. The printer dirver is included in the CD-
ROM that comes with your printer.

When the Printer Sharing dialog box appears during 
installation, select 

Share as

.

When the printer driver for Windows 2000 is not included in 
the CD-ROM that comes your printer, ask your EPSON dealer.

Managing Printers from Browser

This section explains how to manage printers from a browser.

Accessing the Print Server Page

To access the Print Server Page which lists all the printers on the 
server, type the one of the following:

http:

//

the DNS name of the server

/

printers

http:

//

the WINS name of the server

/

printers

http:

//

the IP address of the server

/

printers

Example:

 

http://hv100/printers

Summary of Contents for C82362
























































































































































































































































































Reviews: