The EpsonNet Configuration Utility
10-26
TCP/IP
AppleTalk
Items
Explanations
Get IP Address
Select the method of acquiring the IP address, either
Auto or Manual. When Auto is selected, DHCP is
available. To use the DHCP server, it must be installed
in your computer and must be correctly configured.
See your operating system’s online help for detailed
instructions.
To set the IP address manually, select Manual.
IP Address
Enter the IP address for the network adapter if set to
Manual. Be sure to give an IP address which does not
conflict with any other device on the network.
Subnet Mask
Set the subnet mask.
Default Gateway
Set the gateway address if needed.
SUBMIT button
Saves any changes.
Items
Explanations
AppleTalk
Enable or Disable AppleTalk.
Printer Name
Enter the name of the printer attached to the network
adapter (up to 32 characters).
Entity Type
Displays the entity type of the printer. Enter EPSONLQ2
to set the entity type for the printer.
Zone Name
The zone is automatically selected when you enter "
✽
"
for the Zone Name and select Auto for the Network
Number Set.
Network Number Set
Select Auto or Manual. Usually Auto is recommended.
Network Number for
Manual Mode
Enter the network number when you select to set the
Network Number manually.
SUBMIT button
Saves any changes.
