Maintaining Your Epson Stylus CX All-in-One
31
Replacing Ink Cartridges
When the red
B
ink light starts flashing, one or more cartridges are low on ink.
When the red
B
ink light stays on, you need to replace the cartridge(s). You’ll also
see a message on your screen when you print, telling you which cartridge is low or
empty. (You cannot print when a cartridge is empty.)
You can purchase genuine Epson ink and paper from an authorized Epson reseller.
To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To
purchase online, visit www.epsonstore.com (U.S. sales only). In Canada, please
call 800-463-7766 for reseller referral. Use these part numbers when you order or
purchase new ones.
Caution:
Leave the empty cartridge installed until you have obtained a replacement, or the ink
remaining in the print head nozzles may dry out.
We recommend that you use genuine Epson cartridges. The use of other products may
affect your print quality and could result in printer damage. See www.epson.com for
more cartridge information. Yields vary considerably based on images printed, print
settings, paper type, frequency of use, and temperature. The printer ships with full
cartridges and part of the ink from the first cartridges is used for priming the printer.
1. Make sure the Epson Stylus CX is on.
2. Make sure that the document cover is
closed, then open the scanner.
Caution:
Do not open the scanner when the document
cover is open.
Color
Part number
Black T060120
Cyan
T060220
Magenta
T060320
Yellow
T060420