20
Maintaining Your All-in-One
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
1. Make sure the all-in-one is on and the red
B
ink light is on but not flashing.
2. Open the scanner and make sure its support locks in place.
Caution:
Do not touch any area shown below.
CX4400_qg.book Page 20 Friday, May 4, 2007 10:09 AM