Scanner Settings
Slow
Slows down the feeding speed whenever scanning. Switching
On
and
Off
also switches the icon
displayed at the top of the screen.
Enable this in the following situations:
❏
When originals are jammed frequently
❏
When loading thin originals
❏
When scanning different types or sizes of originals at once
❏
If you feel that the scanner is noisy
Double Feed Stop Timing
Set the timing to stop operations when any double feed of originals is detected.
❏
Immediate: Stops immediately after any double feed is detected.
❏
After Eject: Stops after the originals being scanned are ejected.
DFDS Function
Skips double feed detection only once and continues scanning. Switching on and off also switches the
icon displayed at the top of the screen.
Enable this to scan originals that are detected as double feeds, such as plastic cards and envelopes.
Paper Protection
Reduces damage to the originals by stopping scanning immediately when the following status is
detected.
❏
A feeding error for the originals occurs
❏
Originals are fed askew
Select the detection level to enable this feature. See the table below for details on each level.
Level
Examples of Protectable Paper
Detection Sensitivity for Feeding
Skew
On-Low
Plain paper
Low
On-Medium
Plain paper, Thin paper
On-High
Thin paper (portrait), such as
application forms
High
c
Important:
❏
This function does not always prevent damage of originals.
❏
Depending on the condition of the originals being fed, feeding errors cannot be detected.
Menu Options on the Control Panel
>
>
90
