5.
As shown in the diagram below, slightly lift the front part of the scanner and slowly move the scanner by using
the rollers on the rear face.
c
Important:
❏
Do not tilt the scanner over the position of the roller stopper. The stopper may come into contact with the
desk and damage the desk.
❏
Be careful not to let the scanner fall off of the desk.
❏
Be careful not to touch the antistatic brush. If the brush becomes bent, it cannot eliminate static electricity,
and this may cause the ejected originals to stick to each other.
Transporting over a Long Distance
When you need to transport the scanner due to moving or repairs, follow the steps below to pack the scanner.
1.
Press the
P
button to turn off the scanner.
2.
Unplug the AC adapter.
3.
Remove the cables and the devices.
>
>
Transporting over a Long Distance
107
