Buttons and Lights on the Control Panel
Buttons and Lights
A
Power button
Turns the scanner on or off.
B
Error light
An error has occurred. See “Light Error Indicators” for more details.
C
Automatic Feeding Mode
light
The scanner is in Automatic Feeding Mode. Scanning starts when an
original is placed in the input tray.
D
Stop button
❏
Cancels scanning.
❏
Finishes Automatic Feeding Mode.
E
–
Ready light
On
The scanner is ready to be used.
When originals are loaded in the ADF, the light becomes
brighter.
Flashing
The scanner is scanning, waiting to scan, processing, or
sleeping.
Off
The scanner cannot be used because the power is off or
an error has occurred.
F
Start button
❏
Starts scanning.
❏
Press this when cleaning the inside of the scanner.
G
Wi-Fi connect button
Hold down the
button for more than three seconds to connect to a
Wi-Fi network while the connection mode switch is set to Wi-Fi or AP
mode. See the chapter “Network Settings” for more details.
User's Guide
Scanner Basics
15