You can also assign the job to a button on the scanner, and run the job by pressing it. (Only when using a USB
connection.)
Note:
Document Capture Pro and Document Capture do not support scanning from the button over a wireless connection.
Setting a Job
1.
Start Document Capture Pro (Windows) or Document Capture (Mac OS X).
2.
Click the
(
Manage Job
) icon on the main window.
The
Job Management
window is displayed.
3.
On the
Job Management
window, click
Add
(Windows) or the + icon (Mac OS X).
The
Job Settings
window opens.
4.
Make the job settings on the
Job Settings
window.
❏
Job Name
: Enter a name for the job.
❏
Scan
tab: Set scanning settings on the tab.
❏
Output
tab: Set the output format of the scanned image on the tab.
❏
Destination
: Select the destination of the scanned image.
5.
Click
OK
to close the
Job Settings
window.
6.
Click
OK
on the
Job Management
window.
The job is set in the Document Capture Pro or Document Capture.
Assigning a Job to the Scanner Button
You can assign a job to the scanner’s button, and run the job by pressing the button.
1.
Start Document Capture Pro (Windows) or Document Capture (Mac OS X).
2.
Click the
(
Manage Job
) icon on the main window.
The
Job Management
window is displayed.
3.
Click
Event Settings
on the
Job Management
window (Windows), or click the
icon at the bottom of
the screen (Mac OS X).
4.
Click the job name to select the job you want to assign from the pull-down menu.
5.
Click
OK
on the
Job Management
window.
The job is assigned to the scanner button.
Related Information
&
“Buttons and Lights” on page 15
User's Guide
Advanced Scanning
78