106
5. Gently pull out any jammed originals from the output tray.
6. Close the scanner cover.
7. Carefully follow all loading instructions when you reload originals.
If originals jam in the scanner frequently, try the following:
• Turn off the
Detect Double Feed
setting in Epson Scan 2.
• Clean inside the scanner and replace the roller assembly kit, if necessary.
• Close the output tray and let the originals fall freely onto the surface below the scanner.
Parent topic:
Related tasks
Cleaning Inside Your Scanner
Replacing the Scanner Rollers
Related topics
Scanning is Slow
If scanning becomes slow, try these solutions:
• Scan your original at a lower resolution, if possible.
Summary of Contents for DS-410
