Related Information
&
“Running Web Config on a Web Browser” on page 23
Items for Email Notification
Items
Settings and Explanation
Administrator password changed
Notice when administrator password has been changed.
Scanner error
Notice when the scanner error has occurred.
Backing Up the Settings
You can export the setting value set from Web Config to the file. You can use it for backing up the contacts, setting
values, replacing the scanner, etc.
The exported file cannot be edited because it is exported as a binary file.
Export the settings
Export the setting for the scanner.
1.
Access Web Config, and then select the
Device Management
tab >
Export and Import Setting Value
>
Export
.
2.
Select the settings that you want to export.
Select the settings you want to export. If you select the parent category, subcategories are also selected.
However, subcategories that cause errors by duplicating within the same network (such as IP addresses and so
on) cannot be selected.
3.
Enter a password to encrypt the exported file.
You need the password to import the file. Leave this blank if you do not want to encrypt the file.
4.
Click
Export
.
c
Important:
If you want to export the scanner’s network settings such as the device name and IPv6 address, select
Enable to
select the individual settings of device
and select more items. Only use the selected values for the replacement
scanner.
Related Information
&
“Running Web Config on a Web Browser” on page 23
Import the settings
Import the exported Web Config file to the scanner.
>
>
219
