1.
Access Web Config and select the
Scan
tab >
Document Capture Pro
.
2.
Select
Server Mode
for
Mode
.
3.
Enter the address of the server with Document Capture Pro Server installed on it for
Server Address
.
Enter between 2 and 255 characters in either IPv4, IPv6, host name or FQDN format. For FQDN format, you
can use alphanumeric characters in ASCII (0x20-0x7E) and "- " except for at the beginning and end of the
address.
4.
Click
OK
.
The network is re-connected, and then the settings are enabled.
Registering Preset or Quick Send Buttons
You can register up to 12 frequently used scanning setting as
Preset
.
Settings registered to the preset number 1 to 3 are assigned to the
(Quick Send) buttons on the scanner.
You can register the following destinations as Preset.
❏
Network folder
❏
Email address
Note:
Configure a network folder or email server before creating a preset.
1.
Access Web Config.
“Running Web Config on a Web Browser” on page 23
2.
Login as an administrator to change the scanner settings.
Click
Administrator Login
at the top-right of the screen. Enter the
User Name
and
Current password
, and
then click
OK
.
Note:
If
Administrator Logout
is displayed at the top-right of the screen, you are already logged in as an administrator.
3.
Select
Scan
tab >
Presets
.
4.
Select the
Presets
number you want to configure, and then click
Edit
.
5.
Select
Type
, and then click
Next
.
6.
Enter the name you want to display, and then click
Select from Contacts
or
Enter Destination
to set the
destination information.
You can enter the email address manually to add to the destination.
7.
If
Scan to Email
is selected as the
Type
, set the
Email Settings
.
8.
If
Scan to Network Folder/FTP
is selected as the
Type
, set the
File Settings
.
Preparing to Scan over a Network
>
Registering Preset or Quick Send Buttons
87
