4.
Click
Device Configuration
on the
Home
tab on the ribbon menu.
When the administrator password has been set, enter the password and click
OK
.
5.
Click
Common
>
Contacts
.
6.
Click
Browse
on
Import
.
7.
Select the file you want to import and then click
Open
.
When you select the binary file, in
Password
enter the password you set when exporting the file.
8.
Click
Import
.
The confirmation screen is displayed.
9.
Click
OK
.
The validation result is displayed.
❏
Edit the information read
Click when you want to edit the information individually.
❏
Read more file
Click when you want to import multiple files.
10. Click
Import
, and then click
OK
on the import completion screen.
Return to the device's property screen.
11. Click
Transmit
.
12. Click
OK
on the confirmation message.
The settings are sent to the scanner.
13. On the sending completion screen, click
OK
.
The scanner's information is updated.
Open the contacts from Web Config or scanner's control panel, and then check that the contact is updated.
Using Document Capture Pro Server
By using Document Capture Pro Server, you can manage the sorting method, saving format, and forwarding
destination of a scanning result executed from the scanner's control panel. You can call and execute a job
previously registered on the server from the scanner's control panel.
Install it on the server computer.
For more information on Document Capture Pro Server, contact your local Epson office.
Setting Server Mode
To use Document Capture Pro Server, set up as follows.
Preparing to Scan over a Network
>
Using Document Capture Pro Server
>
86
