Installing EasyMP Monitor
8
•
If your operating system is Windows 8
"C:\Users\(User Name)\AppData\Local\VirtualStore\Program
Files\EPSON Projector\EasyMP (or EMP) Monitor Ver. x.xx (Ver. x.xx
represents the software version)"
If you cannot find the "AppData" folder, from the Start menu, click
"Control Panel" - "Appearance and Personalization" - "Folder Options".
Select "View" tab, and then configure the "Show hidden files, folders,
and drives" setting in "Advanced settings".
After installing this software, follow the instructions below before
starting EasyMP Monitor to transfer the settings.
•
If your operating system is Windows 2000 or Windows XP
Overwrite the existing EMP Monitor.dat file with the copy you made.
The existing EMP Monitor.dat file is in "C:\Program Files\EPSON
Projector\EasyMP Monitor Ver.x.xx".
•
If your operating system is Windows Vista, Windows 7, or Windows 8
Place the copy of the EMP Monitor.dat file in "C:\Users\(User
Name)\AppData\Local\VirtualStore\Program Files\EPSON
Projector\EasyMP Monitor Ver.x.xx".
q
The software name has been changed.
Before: EMP Monitor
_
After: EasyMP Monitor
If you are already using EMP Monitor, you can replace with this software.
Installing
You must have administrator authority in order to install EasyMP
Monitor.
To download the software and manual, visit
www.epson.com
and select
your location.
Double-click the downloaded software file to start the install program.
Follow the on-screen instructions.
If EasyMP or EMP Monitor is already installed, uninstall it before
installing this software.
s
"Uninstalling EasyMP Monitor"
p.47
Limitations imposed by a Windows Vista, Windows 7,
or Windows 8 environment
When using EasyMP Monitor under Windows Vista, Windows 7, or
Windows 8, note the following limitations.
•
You must have administrator authority in order to use
Register at
startup
on the Environment setup screen of EasyMP
Monitor.
s
"Monitoring using the system tray"
p.27
•
If EasyMP Monitor is installed on your computer, uninstall it before
you update the operating system to Windows Vista, Windows 7, or
Windows 8. Updating your OS without uninstalling the software may
cause a malfunction.
s
"Uninstalling EasyMP Monitor"
p.47
Before starting operations
Check the following points before starting up EasyMP Monitor.
•
EasyMP Monitor must be installed on the computer to be used for
monitoring and control.
•
The computer and the projectors must be connected to the network.
•
Depending on the projector model, a commercially-available serial
W
TCP/IP conversion adapter and a connection cable are required in
order to use EasyMP Monitor. See your projector's
User's Guide
.
Make the settings for the serial
W
TCP/IP conversion adapter before
connecting to the projector.
Summary of Contents for EasyMP Monitor 4.53
Page 1: ...EasyMP Monitor Operation Guide Ver 4 53 ...
Page 5: ...5 EasyMP Monitor Features ...
Page 10: ...10 Using EasyMP Monitor ...
Page 45: ...45 Appendix ...
