Epson EB-118 User Manual Download

Page: 83 / 210

Projector Security Features

Select Password and press [Enter].

You see the prompt "Change the password?".

Select Yes and press [Enter].

If you select No, the Password Protection setting menu is

displayed again.

Hold down the [Num] button on the remote control and use the

numeric buttons to set a four-digit password.

The password displays as **** as it is entered. A confirmation prompt is

displayed when you enter the fourth digit.

Enter the password again.

You see the message "Password accepted". If you enter the password

incorrectly, a message is displayed prompting you to re-enter the

password.

Press [Esc] to return to the menu.

Make a note of the password and keep it in a safe place.

Selecting Password Security Types

After setting a password, you see this menu, allowing you to select the

password security types you want to use.

If you do not see this menu, hold down the [Freeze] button on the remote

control for 5 seconds until the menu appears.
• To prevent unauthorized use of the projector, select On as the Power On

Protection setting.

• To prevent changes to the User's Logo screen or related display settings,

select On as the User's Logo Protection setting.

• To prevent changes to network settings, select On as the Network

Protection setting.

• To prevent changes to the projector's schedule settings, select On as the

Schedule Protection setting.

• To prevent changes to the projector's Screen Mirroring settings, select On as

the Screen Mirroring Protec. setting.

Summary of Contents for EB-118



















































































































































































































Search results

Summary of Contents for EB-118

Reviews:

Related manuals for EB-118

Brands by name

Popular brands

Epson EB-118, User Manual

Search results

Summary of Contents for EB-118

Reviews:

Related manuals for EB-118

Brands by name

Popular brands