Wired Network Projection
124
a
Press the [Menu] button, select the
Network
menu, and press [Enter].
b
Select
Network Settings
and press [Enter].
c
To identify the projector over the network, select
Projector Name
and
enter a name up to 16 alphanumeric characters long.
d
Set the
Priority Control Interface
setting to
Wired LAN
.
e
Select the
Wired LAN
menu and press [Enter].
f
Assign the IP settings for your network as necessary.
• If your network assigns addresses automatically, select
IP Settings
to
set the
DHCP
setting to
On
.
• If you must set addresses manually, select
IP Settings
to set the
DHCP
setting to
Off
, and then enter the projector's
IP Address
,
Subnet Mask
, and
Gateway Address
as necessary.
g
To prevent the IP address from being displayed on the network
information screen, set the
IP Address Display
setting to
Off
.
Summary of Contents for EB-L200F
Page 1: ...User s Guide ...
