Add Reception Information:
Prints reception information on the received fax, even if the sender does not set the header
information. The reception information includes the received date and time, sender's ID, reception
ID (such as " #001"), and page number (such as "P1"). By collating the reception ID printed on the
received fax, you can check the transmission log in the fax report and the fax job history. When
Split
Page Settings
is enabled, the split page number is also included.
2-Sided:
Prints multiple pages of received faxes on both sides of the paper.
Print Start Timing:
Select options to start printing the faxes to receive.
❏
All Pages Received: Printing starts after receiving all of the pages. To start printing from the first
page or last page depends on the setting of
Collation Stack
feature. See the explanation for
Collation Stack
.
❏
First Page Received: Starts printing when the first page is received, and then prints in order as the
pages are received. If the printer cannot start printing, such as when it is printing other jobs, the
printer starts printing received pages as a batch when it is available.
Collation Stack:
Since the first page is printed last (output to the top), the printed documents are stacked in the correct
page order. When the printer is running low on memory, this feature may not be available.
Print Suspend Time:
Print Suspend Time
During the specified time period, the printer saves documents received in the printer's
memory without printing them. This feature can be used for noise prevention at night or to
prevent confidential documents from being disclosed while you are away. Before using this
feature, make sure there is enough free memory. Even before the restarting time, you can check
and print the received documents individually from
Job/Status
on the home screen.
Time to Stop
Stops printing documents.
Time to Restart
Restarts printing documents automatically.
Quiet Mode:
Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
Report Settings
You can find the menu on the printer's control panel below.
Settings
>
General Settings
>
Fax Settings
>
Report Settings
>
>
336
