Using the Projector on a Network
49
d
Select the basic options as necessary.
•
If your network uses DHCP, set
DHCP
to
On
.
•
If you are not using DHCP, set
DHCP
to
Off
, and then enter the projector's
IP Address
,
Subnet Mask
, and
Gateway Address
.
e
When you have finished making settings, select
Complete
and follow the on-screen
instructions to save your settings and exit the menus.
f
Press the source button on the remote control or the [Source] button on the control panel,
and then select
LAN
.
The settings are complete when you see the correct IP address on the LAN standby screen.
c
To prevent the IP address from being displayed on the LAN standby screen or the Home screen,
set
IP Address Display
to
Off
.
s
Network
-
Network Configuration
-
Wired LAN
