Installing the Safety Wire
21
You can install the safety wire to prevent the projector from falling from the
ceiling.
Warning
Be sure to use the safety wire provided with the Epson ceiling mount. The safety
wire is available as an optional Safety Wire Set ELPWR01.
g
g
Related Links
• "When Using the Ceiling Mount ELPMB22"
• "When Using the Ceiling Mount ELPMB30"
When Using the Ceiling Mount ELPMB22
You can attach a safety wire to your projector for increased safety as shown.
Before you start, you need to remove the front adjustable feet and the rear
adjustable foot from the projector. Also, make sure you have securely attached
the ELPMB22 ceiling mount to the projector and have the following items
that are included in the safety wire set:
• Safety wire × 1
• Carabiner × 2 (Only one carabiner is used for the ELPMB22.)
• Wire clamp × 1
• Attaching screw (M4 × 10 mm) × 1
a
For details on installing the ELPMB22, see the
Ceiling Mount
ELPMB22/ELPMB23 Instruction Manual
.
a
Attach the wire clamp to the carabiner, and then use the screw to fix
the wire clamp to the wire clamp fixing point ( ) on the projector.
b
Loop the safety wire around the support shaft of the ceiling mount, and
attach both ends to the carabiner on the projector.
