Troubleshooting
57
Check
Remedy
Is an extension cable being used?
If an extension cable is used, electrical interference may affect
the signals.
(Only when projecting computer image sig-
nals)
Is the correct resolution selected?
Set the computer so that the signals being output are compatible
with the projector.
s
Part of the image is truncated (large) or small
Check
Remedy
Is the correct
Aspect
selected?
Select the aspect mode to match the input signal in
Aspect
from
the Configuration menu.
s
Signal
-
Aspect
(Only when projecting computer image sig-
nals)
Is the correct resolution selected?
Set the computer so that the signals being output are compatible
with the projector.
s
Image colors are not right
Check
Remedy
Are the cables connected correctly?
Check that all the cables required for projection are securely
connected.
s
Is the contrast adjusted correctly?
Adjust the
Contrast
setting from the Configuration menu.
s
Image
-
Contrast
Is the color adjusted correctly?
Adjust the
Advanced
setting from the Configuration menu.
s
Image
-
Advanced
(Only when projecting images from a video
device)
Are the color saturation and tint adjusted cor-
rectly?
Adjust the
Color Saturation
and
Tint
settings from the Config-
uration menu.
s
Image
-
Color Saturation
/
Tint
Images appear dark
Check
Remedy
Is the image brightness set correctly?
Adjust the
Brightness
setting from the Configuration menu.
s
Image
-
Brightness
Is the contrast adjusted correctly?
Adjust the
Contrast
setting from the Configuration menu.
s
Image
-
Contrast
Is it time to replace the lamp?
When the lamp is nearly ready for replacement, the images be-
come darker and the color quality becomes poorer. When this
happens, replace the lamp with a new lamp.
s