Solving Image or Sound Problems
154
If you select
Exit
from the
USB Display
icon menu on the
Dock
, USB
Display does not start automatically when you connect the USB cable.
• If the mouse cursor flickers, select
Make the movement of the mouse
pointer smooth
in the
Epson USB Display Settings
program on your
computer.
• Turn off the
Transfer layered window
setting in the
Epson USB Display
Settings
program on your computer.
• For images projected with Windows Media Center, reduce the screen size
from full screen mode.
• For images projected from applications using Windows DirectX, turn off
DirectX functions.
g
g
Related Links
• "Connecting to a Computer for USB Video and Audio"
Solutions When "No Signal" Message Appears
If the "No Signal" message appears, try the following solutions:
• Press the [Source Search] button and wait a few seconds for an image to
appear.
• Turn on the connected computer or video source, and press play to begin
your presentation, if necessary.
• Check that all cables required for projection are securely connected.
• If you are projecting from a laptop computer, make sure it is set up to
display on an external monitor.
• If necessary, turn off the projector and the connected computer or video
source, and then turn them back on.
• If you are projecting from an HDMI source, replace the HDMI cable with
the shorter one.
g
g
Related Links
• "Displaying From a Mac Laptop"
Displaying From a Laptop
If the message "No Signal" is displayed when projecting from a laptop, you
need to set up the laptop to display on an external monitor.
a
Hold down the laptop's
Fn
key and press the key labeled with a monitor
icon or
CRT/LCD
. Wait a few seconds for an image to appear.
b
To display on the laptop's monitor and the projector, try pressing the
same keys again.
c
If the same image is not displayed by the laptop and projector, check
the Windows
Display
utility to make sure the external monitor port is
enabled and extended desktop mode is disabled.
d
If necessary, check your video card settings and set the multiple display
option to
Clone
or
Mirror
.
Displaying From a Mac Laptop
If the message "No Signal" is displayed when projecting from a Mac laptop,
you need to set up the laptop for mirrored display. (See your laptop manual
for details.)
a
Open the
System Preferences
utility and select
Displays
.
b
Select the
Display
or
Color LCD
option, if necessary.
c
Click the
Arrange
or
Arrangement
tab.
d
Select
Mirror Displays
.
Solutions When "Not Supported" Message Appears
If the message "Not supported" is displayed, try the following solutions:
