Shutting Off the Image and Sound Temporarily
66
You can temporarily turn off the projected image and sound if you want to
redirect your audience's attention during a presentation. Any sound or video
action continues to run, however, so you cannot resume projection at the
point that you stopped it.
a
If you want to display an image such as a company logo or picture
when the [A/V Mute] button is pressed, you can select the screen
displayed in the
A/V Mute
setting in the projector's
Extended
menu.
s
Extended
>
Display
>
A/V Mute
a
Press the [A/V Mute] button on the remote control to temporarily stop
projection and mute any sound.
b
To turn the image and sound back on, press [A/V Mute] again.
a
• You can also stop projection using the A/V Mute slide lever on the
projector.
• The projector's power automatically turns off 30 minutes after A/V
Mute is enabled. You can disable this feature.
s
ECO
>
A/V Mute Timer
• The lamp is still operating during A/V Mute, so the lamp hours
continue to accumulate.
g
g
Related Links
• "Projector Setup Settings - Extended Menu"
