Epson ELPAP07 User Manual Download | Manualshive

Page: 175 / 231

background image

• Do not store the projector outdoors for an extended length of time.

• Except as specifically explained in this manual, do not attempt to service this product yourself. Refer

all servicing to qualified personnel. Opening or removing covers may expose you to dangerous
voltages and other hazards.

• Never open any covers on the projector except as specifically explained in this manual. Never attempt

to disassemble or modify the projector. Refer all repairs to qualified service personnel.

• Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the

following conditions: if it does not operate normally when you follow the operating instructions, or
exhibits a distinct change in performance; if smoke, strange odors, or strange noises come from the
projector; if the power cord or plug is damaged or frayed; if liquid or foreign objects get inside the
projector, or if it has been exposed to rain or water; if it has been dropped or the housing has been
damaged.

• Do not touch the plug during an electrical storm. Otherwise, you may receive an electric shock.

• Unplug the projector when it will not be used for extended periods.

• Do not use the projector where it may be exposed to rain, water, or excessive humidity.

• Do not use or store the projector where it may be exposed to smoke, steam, corrosive gases,

excessive dust, vibration, or shock.

• Do not use the projector where flammable or explosive gases may be present.

• Do not use or store the projector or remote control in a hot location, such as near a heater, in direct

sunlight, or in a closed vehicle.

• If you use the projector in a country other than where you purchased it, use the correct power cord for

that country.

• Do not stand on the projector or place heavy objects on it.

• Do not use the projector outside of the required temperature range of 41 to 95 °F (5 to 35 °C) at an

altitude of 7500 feet (2286 m) or less, or 41 to 86 °F (5 to 30 °C) at a higher altitude. Doing so may
cause an unstable display and could lead to projector damage. Do not use or store the projector where
it may be exposed to sudden changes in temperature.

• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or

in direct sunlight for long periods of time. Doing so may cause damage to the case.

• Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not

bring your hands or face close to the vents while projection is in progress. Do not bring your face close
to the projector while it is in use.

• Before you move the projector, make sure its power is turned off, the plug is disconnected from the

outlet, and all cables are disconnected.

175

«
...
173
174
175
176
177
...
»

Summary of Contents for ELPAP07








































































































































































































































Reviews:

No comments

Related manuals for ELPAP07

Brand: Patton electronics Pages: 12

Brand: ZyXEL Communications Pages: 8

Brand: Hama Pages: 12

Brand: Rocstor Pages: 2

Brand: Rosewill Pages: 10

Brand: 3idee Pages: 7

Brand: Digitus Pages: 7

Brand: ResMed Pages: 31

DIL32/PLCC32 ZIF-CS

Brand: Elnec Pages: 2

Brand: Macpower & Tytech Pages: 26

Brand: Westermo Pages: 28

Brand: POPCORN HOUR Pages: 2

KDL-32EX308 - Bravia Ex Series Lcd Television

Brand: Sony Pages: 2

KDL-32EX308 - Bravia Ex Series Lcd Television

Brand: Sony Pages: 7

Brand: Trust Pages: 2

Brand: Vanco Pages: 2

Brand: EnGenius Pages: 47

Small Business WRP400

Brand: Linksys Pages: 59

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands