41
English
G
Attach the projector to the wall mount
Attach the 3-axis adjustment unit with the projector to the wall mount arm.
•
Decide which position you want to use for installing the 3-axis adjustment unit.
Mount it at the
stamp when the image is less than 80 inches diagonally, or at the
stamp
when the projected image is 80 inches or more diagonally.
•
Tighten the M4 × 12 mm hexagon socket head cap bolts (×4) supplied to install the 3-axis
adjustment unit.
When installing or adjusting the wall mount, do not use adhesives to prevent the screws from
loosening and do not use lubricants or oils on the projector slide plate. This may cause the case
to crack and the projector to fall, resulting in personal injury or property damage.
Warning