88
Making Additional Screen Adjustments
Correcting the Image Shape on a Curved Screen
If you are projecting on a curved screen, adjust the Arc Correction setting to correct the image shape.
1. Press the [Menu] button on the remote control or control panel.
2. Select
Installation
.
3. Select
Geometry Correction
.
4. Select
Arc Correction.
If possible, avoid adjustments with the Auto Screen Adjustment, Quick Corner, or
Keystone functions of the projector. Doing so may result in a reduction in image
quality and pen or finger touch calibration.
Touch unit installation requires a projection surface that is flat, smooth, and unwarped
with no more than 0.2 inch (5 mm) of unevenness in any direction on the screen
surface.
Remote Control
Control Panel