background image

INSTALLATION MANUAL

3

Business Machine Security

Limited Warranty Information

Business  Machine  Security,  Inc.  warrants  the  original  purchaser  of  Business  Machine  Security,  Inc.  products  that  they  be  free  of  defects  in 
material and workmanship for life from the date of purchase. User assumes all risk and liability resulting from the use of the products, whether 
used singly or in combination with other goods. Business Machine Security, Inc. neither assumes nor authorizes any person to assume for it any 
liability in connection with the sale or use of the products sold and there are no oral agreements or warranties collateral to or affecting this limited 
warranty. Business Machine Security, Inc.’s only responsibility under this warranty is for the repair or replacement of any Business Machine 
Security, Inc. product found to be defective during the warranty period. Business Machine Security, Inc. assumes no responsibility whatsoever 

for special, indirect or consequential damages resulting from the use of Business Machine Security, Inc. products, and specifically assumes no 

liability for the loss or damage to equipment or data. The remedies set forth in this Limited Warranty are exclusive and the liability of Business 
Machine Security, Inc. with respect to any contract of sale or anything done in connection therewith, whether in contract, in tort, under any 
warranty or otherwise shall not, except as expressly provided herein, exceed the price of the equipment or part on which such liability is based. 
Any damage caused by the improper use, operation beyond capacity, substitution of parts or equipment not approved by Business Machine 
Security, Inc., improper packaging, failure to observe installation or other instructions, transit, or repair by one other than Business Machine 
Security, Inc., will not be covered by and shall void this Limited Warranty. 

THIS IS THE ONLY WARRANTY GIVEN, AND EXCLUDES ALL OTHER WARRANTIES, INCLUDING ANY WARRANTY 
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.                                                                                             

Contact Business Machine Security

Customer Service/ Technical Support at (800) 872-9562 or customerservice@locdown.com

Important Warnings and Cautions!

Warning 

Failure  to  read,  understand,  and  follow  instructions  can  result  in  serious  personal  injury,  damage  to  equipment,  or  voiding 
equipment warranty.

Warning 

Improper  installation  can  result  in  serious  personal  injury  or  death.    The  mounting  surface  must  support  a  weight  factor  of 
four times the combined total weight of the equipment and the mount.  If not, reinforcement of the mounting surface will be 
necessary before installing the mount.

Warning 

It is the installer’s responsibility to make sure the mounting surface can support the combined weight of the mount and 
equipment by a factor of four times.

Warning 

It is the installer’s responsibility to make sure that mounting surface and subsurface is free and clear of all electrical wires, 

plumbing  and  gas  pipes.    Failure  to  provide  adequate  clearance  of  all  electrical  wires  and  pipes  can  result  in  fire,  serious 

personal injury or death. 

Warning 

Mount and equipment exceeding a combined weight of 60 lbs. can result in damage to the support structure, the mount, the 
equipment, and may cause serious personal injury. 

Warning 

Business Machine Security, Inc. does not warrant its mounts against damage caused by the use of its mounts for any purpose 
other than for the purposes for which it has been designed.  Business Machine Security, Inc. is not responsible for damage, or 

injury that may result in the use of any unauthorized modifications or attachment.

Warning 

Proper safety gear and practices should be adhered to at all times throughout the installation process.

Warning  

Do not install the mount near any heat source or air conditioning vent which may be prone to vibration.

Warning 

Maximum load capacity of mount: 25 lb

Warning 

When installing or adjusting the ceiling mount, do not use adhesives, lubricants, or oils to prevent the screws from loosening. 
If you use adhesives, lubricants, or oils to prevent the screws from loosening, the casing may crack and the projector may fall, 
causing serious injury and damage to the projector.

Summary of Contents for ELPMBATA - High Security - Mounting












Reviews: