62
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Color
Adjustment
Adjusts the absolute
and intensity of
each RGB (red, green, blue) colour for each input source.
•Abs. Color Temp.: Lets you adjust bright colours within a
range from reddish tinges to bluish
tinges.
If the colour temperature is lower,
colours appear reddish and color tones
appear softer.
If the colour temperature is higher,
colours appear bluish and colour tones
appear sharper. Press the [Enter] button
on the remote control and make the
adjustment in the colour adjustment sub-
menu that appears.
•RGB
: Press the [Enter] button on the remote
control, select "R" (Red), "G" (Green) or
"B" (Blue) and make the adjustment in
the colour adjustment sub-menu that
appears.
The settings can be made while viewing
the projected image on the screen.
(This item cannot be selected if "sRGB" has been selected as
the "Color Mode" setting in the "Image" menu.)
Abs. Color
Temp.:
Depends on
connection
Projection
Sets the projection position for the projector.
•Front
: Select when the projector is in front of the
screen.
•Front/Ceiling : Select when the projector is in front of the
screen and suspended from the ceiling.
•Rear
: Select when the projector is behind the
screen.
•Rear/Ceiling : Select when the projector is behind the
screen and suspended from the ceiling.
Front
Sub-menu
Function
Default
Summary of Contents for EMP-54
Page 1: ...User s Guide ...
