34
Turning the Projector On
Turning the Projector On
User’s Guide
Turning the Power On and Projecting Images
PROCEDURE
Check that the Power indicator is lit orange.
If using the remote control, set the [R/C] switch on the
remote control to "ON".
Press the [Power] button on either the remote control
or the projector's control panel to turn the power on
for the projector.
A beep will sound and the Power indicator will change to
flashing green.
1
2
3
Remote control
Flashing green
Caution
Do not disconnect the power cable or turn off a circuit breaker to turn
the power off directly while the Power indicator is still flashing green,
otherwise it will shorten the lamp's operating life. In addition, the
[Power] buttons on the remote control and the projector's control
panel will be disabled for the same reason.
Summary of Contents for EMP-830
Page 1: ...User s Guide ...