85
List of Configuration Menu Commands
User’s Guide
Configure network connection. (EMP-830 only)
For details about settings
If using the EMP-835, network settings are made using EasyMP.
s
EasyMP Network Setup Guide
Network
Reset
Returns all adjustment values in the "Extended" menu except for the "Projector ID", "Projection",
"Standby Mode", "COM Port" and "Language" settings to their default values. If you would like to
return all menu items to their default,
s
If set to "Network ON", the network monitoring and control functions can be used even when the
projector is in standby mode. If you change the setting, the new setting will be enabled after the
power is turned off.
COM Port
Language
, ,
Français
, Deutsch
,
Italiano
,
Español
,
Português
, ,
English
Sets whether the [RS-232C] or [USB] port is to be used for communicating with a computer. If you
change the setting, the new setting will be enabled after the power is turned off.
Sets the language to be used for menu and message displays.
If using the EMP-835, this setting is also applied to EasyMP.
Standby Mode
Network ON,
Network OFF
, USB
RS-232C
Default setting values
(Varies depending on country of purchase)
Direct Power ON
Sleep Mode
Operation
Sets whether direct power on is enabled ("ON") or disabled ("OFF").
s
When you set to "ON" and leave the power cable connecting to a wall socket, be aware
of the sudden surges of electricity when the power comes back on after the power outage
or something, that cause the projector turn on automatically.
Sets whether projection stops automatically ("ON") or not ("OFF") when no operations
are carried out for approximately 30 minutes while no image signals are being input.
, OFF
ON
ON,
OFF
Summary of Contents for EMP-830
Page 1: ...User s Guide ...
