The line colors in the Timers list have the following meanings:
Current day's timer setting
When some of the projectors in the group have timer setting enabled
and others have it disabled for the current day's timer setting
When the current day's timer setting is a disabled setting
Timer setting for a day other than the current day
The details that can be checked and operations that can be carried out
at this time are given below.
Projectors
Selects a group or projector to check the status of.
When a group is selected, the timer setting statuses for all
projectors in that group are displayed.
Date
Shows the current day in a red box.
Days for which timer settings have been made are shown in bold.
Click
or
to switch to the calendar for the previous or
next month.
Timers
Shows a list of the timer settings.
Enabled/
disabled
Switches the timer settings that have been selected from the
timer list between enabled and disabled.
Add
Registers new timer settings.
s
Edit
Lets you change the timer settings that have been selected from
the timer list. If a group has been selected for status checking,
the settings cannot be changed.
Delete
Lets you delete timer settings that have been selected from the
timer list.
Procedures for new timer settings
Procedure
A
Click "Add" on the timer setting window. The following
window is displayed and the new timer settings are applied.
At Operation, you can carry out the operations of turning the
power on and off and switching the input sources, similarly for
the control buttons on the main window. If you set the input
source switching, the projector's power will turn on at the timer
start time even if it is not on at the time. Because of this, it is
not necessary to make two separate timer settings for turning the
power on and switching the input source.
B
After completing the timer settings, click "OK".
The timer settings that have been made will be registered and
they can be checked in the displayed timer list.
q
You can enable and disable all of the timer settings that have been
registered. Select
Timer
-
Enable
or
Disable
from the Tool menu.
Using the control functions
30
Summary of Contents for EMP Monitor
Page 1: ...EMP Monitor Operation Guide V4 30 ...
Page 4: ...EMP Monitor Features ...
Page 8: ...Using EMP Monitor ...
Page 35: ...Appendix ...