background image

16

Adjusting the Projection Position (Image Shift)

When you cannot setup this projector directly in front of the screen, the 
projection position can be finely tuned without moving this projector. 

PROCEDURE

A

Using the button on the projector, perform zoom 
adjustment or keystone correction. 

s

Quick Start Guide

The Image Shift adjustment screen is displayed after you finish 
making adjustments.

B

Adjust projection position.

C

Press the [Esc] button to close the adjustment 
screen.

The screen closes automatically if no operations are performed 
for about 10 seconds.

• The projection position cannot be adjusted when zoom 

is set to maximum "wide".

• Even if you turn the power supply off, the "Image 

Shift" settings you make are kept. When either the 
projector position or the angle of the projector is 
changed, you can readjust or perform the following 
operations.

• You can also make adjustments from the configuration 

menu. 

s

p.35

Using the Remote Control 

Using the Control Panel

Press and hold down the 
[Wide] and [Tele] buttons 
for more than one second.

Control Panel

Summary of Contents for EMP-S4














































































Reviews: