background image

48

Problems Solving

 The message "Not Supported." is displayed

 The message "No Signal." is displayed

Check

Remedy

Are the image signal format settings 
correct?

If a 

composite video

g

 or 

S-Video

g

 source is connected to the projector, use the "Video Signal" menu 

command to select the signal format. "Signal" - "Video Signal" 

s

p.34

Does the mode match the frequency and 
resolution of the image signals?

Refer to the documentation provided with your computer for details on changing the resolution and 
frequency of the image signals being output from the computer.
"List of Supported Monitor Displays"

s

p.70

Check

Remedy

Are the cables connected correctly?

Check that all of the cables required for projection are securely connected. 

s

Quick Start Guide

Has the correct video input port been 
selected?

Press the [Computer], [S-Video] or [Video] button on the remote control or the [Source Search] button on 
the remote control or the projector's control panel to change the image. 

s

p.18

Is the power for the computer or video 
source turned on?

Turn the power on for the devices.

Are the image signals being output to the 
projector?

If the image signals are only being output to the computer's LCD monitor or to the accessory monitor, 
you need to change the output to an external destination as well as the computer's own monitor. For some 
computer models, when the image signals are output externally, they no longer appear on the LCD 
monitor or accessory monitor. 

s

 Computer documentation, under a title such as "External output" or "Connecting an external 

monitor"
If the connection is made while the power is already turned on, the function [Fn] key that switches the 
computer's video signal to external output may not work. Turn the power for the projector and the 
computer off and then back on again. 

s

Quick Start Guide

Only when projecting images 
from a video source

Only when projecting computer images

Only when projecting images from 
a laptop computer or computer 
with a built-in LCD screen

Summary of Contents for EMP-S4














































































Reviews: