Making Detailed Adjustments
43
Customizing Projector Features
Use the settings in this section to adjust the image size and position, suppress on-screen text,
and select basic setup options.
Image Sizing
Before adjusting any of these settings, make sure you have already selected an appropriate
aspect ratio for the type of picture you’re viewing (see page 26).
■
Output Scaling
For component video formats, this setting lets you see the edges of the image that are not
normally visible in the picture (see page 63). Select
Larger
to view both the hidden and
visible parts of the image.
Normal
displays images at the standard size.
For HDMI signals, select
Auto
for normal operation. Select
Smaller
to show a slightly
reduced image if you see interference at the top or bottom of the screen for computer
images (displays digital video at standard size). Select
Normal
to expand digital video so
it includes both the hidden and visible parts of the picture (displays computer images at
full size).
■
Position
Use the arrow buttons to fine-tune the position of the image on the screen.
■
Zoom Caption
Lets you adjust the shape and position of the image so that subtitles are visible (available
only if the aspect ratio has been set to Zoom). Use
Vertical Size
to adjust the proportions
of the image, and
Zoom Position
to move the image up or down.
■
Aspect
This setting lets you change the aspect ratio of your image, and works the same as
pressing the
Aspect
button on the remote control. See page 26 for more information.
Image > Advanced > Output Scaling
Image > Position
Image > Zoom Caption
Image > Aspect
