Setting Up the Projector
21
Turning On the Projector
1. Remove the lens cap.
2. Turn on any connected equipment you plan to use.
3. Turn on the power switch on the back of the projector.
4. Press the
On
button on the remote control, or press the
Power
button on the projector.
Note:
To keep children from turning on the projector, you can use the Child Lock (see page 31).
If you’ll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude
Mode so the fan can properly cool the projector at the high altitude air pressure. See page 46 for
details.
The projector takes about 30 seconds to warm up and display an image. If you don’t see a
picture, you may need to change the image source as described on the next page.
Power switch
Turn on the projector
