Projecting the Wall Bracket Guide
5
4.
Open the wall bracket guide file and display it in full screen mode.
Note:
Make sure the screen size indicated at the top of the image matches the screen that came with your projector.
5.
Plug in the projector and press the
P
power button on the remote control to turn the projector on. The guide is projected
onto your wall.
6.
Press the
x
menu button on the remote control, select the
Settings
menu, and choose
Reset
.
7.
Select the
Settings
menu, select
Zoom
, and make sure the image is at its maximum size. If it isn’t, press the left arrow button
repeatedly to enlarge it to the maximum size.
8.
Raise or lower the focus lever to sharpen the image.
Note:
For best results, wait 20 minutes after turning the projector on before you adjust the focus.
100" screen
120" screen