Network Software
117
Network Guide
LJ4 Emulation
GL2 Emulation
Items
Explanations
Emulation
Select LJ4.
Font Source
Select the default font source.
Font Number
Type the default font number from the default font source.
Pitch
Type the default font pitch if the font is scalable and
fixed-pitch.
Height
Type the default font height if the font is scalable and
proportional.
Symbol Set
Select the default symbol set.
Form
Type the number of lines for the selected paper size and
orientation.
Source Symbol Set
Available only when an optional font ROM is installed.
Dest Symbol Set
Available only when an optional font ROM is installed.
CR Function
Select CR (carriage-return) or CR+LF
(carriage-return/line-feed) operation whenever the print
position exceeds the right margin.
LF Function
Select LF (line-feed) or CR+LF (carriage-return/line-feed)
operation to add a line feed to each carriage return it
receives.
Tray Assign
Select the tray assigning from 4, 4K, or 5S. When 4, 4K, and
5S are selected, LaserJet 4 Compatible, LaserJet
4000/5000/8000 Compatible, and LaserJet 5 Si
Compatible are available respectively.
Set button
Saves any changes.
Refresh button
Clears any changes and reloads the previous settings.
Items
Explanations
Emulation
Select GL2.
GL-Mode
Select whether the emulation is similar to the GL/2 or the
HP LaserJet 4 emulation of the GL/2.
Scale
Select whether the output from the software is scaled,
and if so, how the scale factor is calculated: based on the
output paper size of the software application.
Origin
Select whether the logical origin of the “plotter” is from
the corner or the center of the paper.
Pen
Select the logical “pen” which “plots” the drawing.
