EPL-N2700 Optional Units
Revision A
10-Bin Unit
Installing the 10-Bin Unit
107
5.1 Installing the 10-Bin Unit
This section describes how to install the 10-Bin Unit to the printer main
body. Note you are required to remove optional units such as the 10-Bin
Unit when servicing the printer. The procedure for removing the 10-Bin
Unit is not included since you can remove it by reversing the installation
procedure.
5.1.1 Installing the 10-Bin Unit
1. Open the packing carton and get all packed parts and a manual.
Figure 5-1. Packing Condition
2. Turn the printer power off and disconnect the AC power cable and a
interface cable.
3. If a 5-Bin Unit is installed to the printer, remove it. (Refer to Chapter
4.)
C A U T I O N
Unless the optional LCC Unit and the Double Cassette
Unit are installed on the printer, the 10-Bin Unit can not
be installed.
C A U T I O N
After removing the packing materials, please keep
them out of children’s reach.
Summary of Contents for EPL N2700
