EPL-N2700 Optional Units
Revision A
10-Bin Unit
Disassembly and Assembly of the 10-Bin Unit
122
5.2.2.10 Vertical Transport Roller Removal
1. Remove the outer covers. (See Section 5.2.1.)
2. If the Vertical Transport Roller gear 17T to be removed is inner side
of the following parts, remove that part.
Transport Motor (Section 5.2.2.19)
Sorter Set Switch (Section 5.2.2.3)
Controller board bracket (Section 5.2.2.4.)
3. Remove two screws (3508) securing each support plate to the
frame and remove the support plates along with the jammed paper
remove guide.
Figure 5-35. Jammed Paper Remove Guide
4. Remove two E-rings (9125) from both edges of the Vertical
Transport Roller.
5. Unhook the gear 17T by the inside and remove it from the Vertical
Transport Roller.
6. Remove the Vertical Transport Roller along with the ball bearing.
7. Remove the ball bearing from the Vertical Transport Roller.
Figure 5-36. Vertical Transport Roller Removal
9125
9125
9125
9125
Summary of Contents for EPL N2700
