EPL-N2700 Optional Units
Revision A
10-Bin Unit
Disassembly and Assembly of the 10-Bin Unit
123
5.2.2.11 Eject Roller Removal
1. Remove the outer covers. (See Section 5.2.1.)
2. Remove the foot covers from the 10-Bin Unit. (See Section 5.1.2.)
3. Remove the bin rack. (See Section 5.2.2.8.)
4. If the Vertical Transport Roller gear 17T to be removed is inner side
of the following parts, remove that part.
Transport Motor (Section 5.2.2.19)
Controller board bracket (Section 5.2.2.4.)
5. Remove two E-rings from both ends of the Eject Roller.
6. Unhook the Eject Roller gear (17T) by the inside and remove the
gear from the Eject Roller.
7. Remove the Eject Roller along with the ball bearing.
8. Remove the ball bearing from the Eject Roller.
Figure 5-37. Eject Roller Removal
Summary of Contents for EPL N2700
