SCSI Specifications
Interface
type:
Function:
logic level:
Electrical standard:
Terminator:
ID Setting:
Connector type:
ANSI X3.131-1986 standard
The following functions are included.
BUS FREE phase
ARBITRATION phase
SELECTION/RESELECTION phase
COMMANDphase
(Logical Unit number is fixed to 0 and
command link function is not supported.)
DATA phase
Data in phase
Data out phase
STATUS phase
MESSAGE phase
(Includes MESSAGE IN phase and
MESSAGE OUT phase)
ATTENTION condition
RESET condition
TTL level compatible
As per ANSI X3.131-1986
Internal terminator turned on or off by the
switch
Selectable from 0 to 7 with the rotary
switch.
(8 and 9 should not be selected.)
Two spin connectors
Technical Specifications 5-9
Summary of Contents for ES-600C
