C O N F I D E N T I A L
Paper roll
Print commands FF
Ver. 4.0
p. 1042
FF
[Name]
(2) Print and feed label to print starting position (on label)
[Format]
ASCII
FF
Hex
0C
Decimal
12
[Default]
None
[Range]
None
[Printers not featuring this command]
TM-T88II,
TM-U200B/D,
TM-U300A/B
[Description]
Prints the data in the print buffer and feeds the next label to the print starting position.
[Notes]
■
This command is enabled only when a label is selected in standard mode. Printer operation
differs when page mode is selected.
■
The data is deleted in the printing area after being printed.
■
This command returns the values set by
ESC W
to the default values.
■
The value set by
ESC T
is maintained.
■
After printing, the printing position moves to the beginning of the line. When a left
margin is set, the position of the left margin is the beginning of the line.