C O N F I D E N T I A L
Paper roll
Print position commands ESC T
Ver. 4.0
p. 1159
•
If the starting position is the upper left or lower right of the printing area:
These commands use horizontal motion units:
ESC SP
,
ESC $
,
ESC \
These commands use vertical motion units:
ESC 3
,
ESC J
,
GS $
,
GS \
•
If the starting position is the upper right or lower left of the printing area:
These commands use horizontal motion units:
ESC 3
,
ESC J
,
GS $
,
GS \
These commands use vertical motion units:
ESC SP
,
ESC $
,
ESC \
[Model-dependent variations]
None
Program Example for all printers
Print Sample
PRINT #1, CHR$(&H1B);"L";
←
Select page mode
PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(180);
PRINT #1, CHR$(&H1B);"W";CHR$(0);CHR$(0);CHR$(0);CHR$(0);
CHR$(240);CHR$(0);CHR$(200);CHR$(0);
←
Set printing area
PRINT #1, CHR$(&H1B);"T";CHR$(0);
←
Select print direction
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, CHR$(&H1B);"T";CHR$(1);
←
Select print direction
PRINT #1, "CCCCC"; CHR$(&HA);
PRINT #1, "DDDDD"; CHR$(&HA);
PRINT #1, CHR$(&H1B);"T";CHR$(2);
←
Select print direction
PRINT #1, "EEEEE"; CHR$(&HC);
←
Batch print and return to standard mode
AAAAA
BBBBB
CCCCC
DDDDD
EEEEE
Printing
by ESC W
area set
←