C O N F I D E N T I A L
Paper roll
Bit-image commands GS v 0
Ver. 4.0
p. 1211
[Notes]
■
When standard mode is selected, this command is enabled only when
there is no data in the print buffer. If data exists in the print buffer, the
printer processes
m
and the following data as normal data.
■
When page mode is selected, this command is enabled. If this command is processed in
page mode, the printer processes
m
and the following data as normal data.
■
Data (
d
) specifies a bit printed to 1 and not printed to 0.
■
If a raster bit image exceeds one line, the excess data is not printed.
■
The raster bit image is not affected by print modes (emphasized, double-strike, underline,
character size, white/black reverse printing, upside-down printing, or 90° clockwise-
rotated).
■
This command feeds as much paper as is required to print the raster bit image, regardless
of the line spacing specified by
ESC 2
or
ESC 3
.
■
If this command is processed while a macro is being defined, the printer cancels macro
definition, clears the definition, and prints a raster bit image.
■
After printing a raster bit image, the printer processes normal data.
[Model-dependent variations]